Controlled Production From Engineering Release to Final Run-off
From fabrication and assembly to electrical integration and factory testing, X-YES manages the complete manufacturing process for vertical conveyor systems.
Manufacturing means control
The approved design has to survive contact with the factory floor.
X-YES connects engineering, fabrication, assembly and testing based on the released project specification.
Manufacturing capability is not just floor space. It is the ability to translate application decisions into repeatable dimensions, interfaces, motion, wiring, guarding and test conditions.
Capacity in context
Scale for parallel projects—without treating custom work as an exception.
The published company materials describe a two-base manufacturing structure with more than 8,000㎡ of facilities and annual capability for more than 200 vertical lifting systems.
Jiangsu and Henan facilities coordinate fabrication, assembly, testing and project support.
Space for structural fabrication, component preparation, complete-machine assembly and factory testing.
Production capability supporting standard vertical conveyor systems and customized vertical lifting projects.
Equipment & process capability
The factory is organized around the processes required to build reliable vertical conveyor systems.
X-YES combines structural fabrication, component preparation, mechanical assembly, electrical integration and factory testing to build each vertical conveyor system.
Laser cutting & parts preparation
Steel plates, brackets and frame components are prepared according to released drawings before fabrication.
Buyer value: Accurate preparation creates repeatable geometry and consistent assembly from the beginning of production.
Welding & frame fabrication
Frames and structural assemblies are fabricated and checked according to project dimensions.
Buyer value: Dimensional accuracy helps maintain alignment for lifting, transfer and guarding interfaces.
Machining, forming & surface finishing
Guide components, brackets and interface parts are machined or prepared according to project requirements, followed by painting or specified surface treatment.
Buyer value: Functional surfaces and environmental finish follow the released scope.
Precision mechanical assembly
Drives, transmission components, guides, carriers, platforms and conveyor modules are assembled as one integrated motion system.
Buyer value: Component fit is verified before the site receives modules.
Electrical installation
Control cabinets, PLC, motors, sensors, field devices and safety circuits are integrated according to project requirements.
Buyer value: Mechanical movement and control functions are verified together before shipment.
Complete-machine testing & run-off
No-load, representative-load, transfer sequence, safety functions and agreed interface behavior are tested before shipment.
Buyer value: Potential issues are identified and resolved before delivery.
Production route
Eight stages, with defined checks from engineering release to delivery.
The sequence varies by machine type and project scope, while key dimensions, interfaces and functions are verified before moving to the next stage.
Engineering release
Approved layout, load data, interfaces, BOM and control requirements become the basis for production.
Checkpoint: Approved materials and purchased components ready for production.
Material & component preparation
Key purchased items and production materials are checked against the project requirements.
Checkpoint: Approved materials and purchased components ready for production.
Parts processing
Structural, carrier and transfer components are cut, machined, formed or prepared for fabrication.
Checkpoint: Components prepared for dimensional verification.
Fabrication & surface work
Frames and subassemblies are welded, finished and prepared according to the released design, with dimensional checks before assembly.
Checkpoint: Verified mechanical subassemblies.
Mechanical assembly
Drive systems, chains or belts, guides, platforms, carriers, conveyor modules and guarding structures are assembled into the complete mechanical system.
Checkpoint: Mechanically complete equipment ready for electrical integration.
Electrical integration
Control cabinets, motors, sensors, field devices, wiring and project control functions are installed.
Checkpoint: Powered system ready for commissioning.
Debugging & run-off
Motion, sequence, transfer, safety functions and application-specific settings are tested and adjusted.
Checkpoint: Verified operating sequence, transfer performance, safety functions and application settings.
Final preparation
Final inspection, documentation, disassembly plan where required, packing and shipping conditions are confirmed.
Checkpoint: Final inspection completed and approved for delivery.
What happens in production
Manufacturing workstreams behind each vertical conveyor system.
Each project has different requirements. This capability map shows how X-YES coordinates mechanical production, electrical integration, factory verification and delivery preparation for vertical conveyor systems.
- Frame and structural fabrication
- Carrier, platform and conveyor preparation
- Drive, guide and transmission assembly
- Guarding and enclosure preparation
- Control cabinet assembly and installation
- Motor, sensor and field-device integration
- Sequence and operating-mode setup
- Interface simulation within agreed scope
- Dimensional and assembly inspection
- No-load and load operation
- Safety and abnormal-condition checks
- Complete-machine testing and FAT preparation
- Project documentation and equipment records
- Packing or modular disassembly planning
- Shipment coordination
- Installation and commissioning guidance
Standard + custom
Reuse proven architecture. Customize only where the application demands it.
Proven architectures improve reliability and repeatability. Application-specific engineering ensures the system fits the factory layout, process flow and operating requirements.
Continuous, reciprocating, fork-type or single-column architectures
Load carrier, platform size and product support geometry
Drive and guide principles appropriate to the machine type
Lifting height, floor levels and infeed/outfeed directions
Control cabinet and standard operating modes
Line signals, sequence ownership and upstream/downstream interfaces
Core safety and inspection philosophy
Guarding, enclosure, access, environment and destination requirements
Factory build and test workflow
Test product, FAT method, witness plan, documentation and packing
Plan a factory review
See the engineering behind the finished machine.
A factory review should focus on the project risks, engineering decisions and delivery readiness that matter most.
- Production walkthroughMaterial preparation, fabrication, assembly and electrical integration.
- Project reviewReleased layout, interfaces, load data and current build status.
- Machine demonstrationOperating sequence, access, guarding and maintenance points.
- Acceptance preparationTest method, records, documentation and shipment plan.
Manufacturing FAQ
What customers usually want to understand before production.
Which parts of the manufacturing process are completed by X-YES?
X-YES coordinates application engineering, mechanical and electrical design, parts and structural production, assembly, electrical integration, machine testing and delivery preparation. The exact in-house and supplier scope is confirmed per project.
Can you build both standard and non-standard systems?
Yes. Proven product architectures are used where suitable, while platform, carrier, enclosure, transfer direction, controls and interfaces can be engineered for the application.
Can customers inspect the machine before shipment?
Factory acceptance or remote witness arrangements can be planned according to the contract. The test method, representative load and acceptance criteria should be agreed before manufacturing.
How is a tall machine prepared for shipping?
Depending on dimensions and destination, equipment may be shipped in modules with identification and reassembly guidance. The packing and installation plan is confirmed for the final configuration.
Can X-YES support installation outside China?
Installation guidance, commissioning coordination and on-site support can be arranged according to destination, schedule and contract scope.
Quality Control & Testing Process
Start with the application
Tell us what has to move—and where.
Share the load, throughput, travel height and available layout. Our engineering team will use the information to discuss a practical vertical transfer route.
PROJECT INQUIRY
Tell us what needs to move.
We will reply to your email within 24 hours.